The Influence of Amine containing Epoxy Adhesive on Gold – Copper Alloys

Stefan Meister

The Influence of Amine containing Epoxy Adhesive on Gold – Copper Alloys

Stefan Meister

Chair of General and Analytical Chemistry (120)

Research output: Thesis › Master's Thesis (University Course)

Abstract

Due to the fabulous look of rose gold jewelry, demand for rose gold articles is still increasing, but, the durabilty of these articles has decreased and lab tests have already revealed that one component adhesive, especially DELO SJ2750 tested in an artificial sweat solution, led to a higher stone fall-out rate. Specimens were prepared with 2 different gold-copper ratios and immersed in two different epoxy adhesives that contain amine. After cleaning, the samples were investigated with XPS. Samples with lower gold rates showed a tensity to corrode, because the amount of oxygen and nitrogen increased. Moreover, the cleaning process did not work well and the Threebond 2222W samples were still contaminated with adhesive. Additionally, all results are not significant and further tests should be carried out.

Translated title of the contribution	Einfluss Aminhältiger Klebstoffe auf Gold-Kupferlegierungen
Original language	English
Awarding Institution	Montanuniversität
Supervisors/Advisors	Mori, Gregor Karl, Supervisor (internal)
Publication status	Published - 18 Dec 2017

Bibliographical note

embargoed until null

Keywords

Adhesive
Epoxy
Adhesion
Rosegold
Gold
Copper

Cite this

@phdthesis{9231c6ca5689486696f6542c5456b902,

title = "The Influence of Amine containing Epoxy Adhesive on Gold – Copper Alloys",

abstract = "Due to the fabulous look of rose gold jewelry, demand for rose gold articles is still increasing, but, the durabilty of these articles has decreased and lab tests have already revealed that one component adhesive, especially DELO SJ2750 tested in an artificial sweat solution, led to a higher stone fall-out rate. Specimens were prepared with 2 different gold-copper ratios and immersed in two different epoxy adhesives that contain amine. After cleaning, the samples were investigated with XPS. Samples with lower gold rates showed a tensity to corrode, because the amount of oxygen and nitrogen increased. Moreover, the cleaning process did not work well and the Threebond 2222W samples were still contaminated with adhesive. Additionally, all results are not significant and further tests should be carried out.",

keywords = "Klebstoff, Rosegold, Kupfer-Goldlegierung, Adhesive, Epoxy, Adhesion, Rosegold, Gold, Copper",

author = "Stefan Meister",

note = "embargoed until null",

year = "2017",

month = dec,

day = "18",

language = "English",

type = "Master's Thesis (University Course)",

school = "Montanuniversitaet Leoben (000)",

}

TY - THES

T1 - The Influence of Amine containing Epoxy Adhesive on Gold – Copper Alloys

AU - Meister, Stefan

N1 - embargoed until null

PY - 2017/12/18

Y1 - 2017/12/18

N2 - Due to the fabulous look of rose gold jewelry, demand for rose gold articles is still increasing, but, the durabilty of these articles has decreased and lab tests have already revealed that one component adhesive, especially DELO SJ2750 tested in an artificial sweat solution, led to a higher stone fall-out rate. Specimens were prepared with 2 different gold-copper ratios and immersed in two different epoxy adhesives that contain amine. After cleaning, the samples were investigated with XPS. Samples with lower gold rates showed a tensity to corrode, because the amount of oxygen and nitrogen increased. Moreover, the cleaning process did not work well and the Threebond 2222W samples were still contaminated with adhesive. Additionally, all results are not significant and further tests should be carried out.

AB - Due to the fabulous look of rose gold jewelry, demand for rose gold articles is still increasing, but, the durabilty of these articles has decreased and lab tests have already revealed that one component adhesive, especially DELO SJ2750 tested in an artificial sweat solution, led to a higher stone fall-out rate. Specimens were prepared with 2 different gold-copper ratios and immersed in two different epoxy adhesives that contain amine. After cleaning, the samples were investigated with XPS. Samples with lower gold rates showed a tensity to corrode, because the amount of oxygen and nitrogen increased. Moreover, the cleaning process did not work well and the Threebond 2222W samples were still contaminated with adhesive. Additionally, all results are not significant and further tests should be carried out.

KW - Klebstoff

KW - Rosegold

KW - Kupfer-Goldlegierung

KW - Adhesive

KW - Epoxy

KW - Adhesion

KW - Rosegold

KW - Gold

KW - Copper

M3 - Master's Thesis (University Course)

ER -