Selective Precipitation of Metal Oxalates from Lithium Ion Battery Leach Solutions

Research output: Contribution to journalArticleResearchpeer-review

1 Citation (Scopus)

Abstract

The separation of cobalt and nickel from sulfatic leach liquors of spent lithium-ion batteries is described in this paper. In addition to the base metals (e.g., cobalt and nickel), components such as manganese and lithium are also present in such leach liquors. The co-precipitation of these contaminants can be prevented during leach liquor processing by selective precipitation. For the recovery of a cobalt-nickel mixed material, oxalic acid serves as a suitable reagent. For the optimization of the precipitation retention time and yield, the dependence of the oxalic acid addition must be taken into account. In addition to efficiency, attention must also be given to the purity of the product. After this procedure, further processing of the products by calcination into oxides leads to better marketability. A series of experiments confirms the suitability of oxalic acid for precipitation of cobalt and nickel as a mixed oxalate from sulfatic liquors and also suggests a possible route for further processing of the products with increased marketability. The impurities in the resulting oxides are below 3%, whereby a sufficiently high purity of the mixed oxide can be achieved.

Translated title of the contributionSelektive Fällung von Metalloxalaten aus Laugungslösungen von Lithium-Ionen-Batterien
Original languageEnglish
Article number1435
Pages (from-to)1-15
Number of pages15
JournalMetals : open access journal
Volume10.2020
Issue number11
DOIs
Publication statusPublished - 29 Oct 2020

Cite this