Die Wirkung von Bor im Vergütungsstahl 42CrMo4

Translated title of the contribution: The effect of boron on the heat treatable steel 42CrMo4

Phillip Haslberger

Research output: ThesisDiploma Thesis

1103 Downloads (Pure)


Heat treatable steels, such as 42CrMo4, show excellent mechanical properties due to their martensitic microstructure after a suitable heat treatment. Especially for large components it is of utmost importance to retard the transformation of austenite to undesired microstructure constituents. It is well known that boron, if added in a proper amount, can significantly retard the transformation of austenite to bainite or ferrite/perlite. During the heat treatment it diffuses to the austenite grain boundaries, where it reduces the driving force for the nucleation of new phases. The aim of this work was to determine whether the expected transformation retardation occurs in 42CrMo4 and whether boron is actually situated at prior austenite grain boundaries. Therefore, TTT-diagrams were created. A prior austenite grain boundary was prepared for atom probe tomography by electro-polishing, etching and sharpening by focused ion beam in combination with transmission electron backscatter diffraction measurements. Additionally, simulations with Thermo-Calc were carried out. A slight transformation retardation of bainite could be seen in the TTT-diagrams. Furthermore boron could be found at a prior austenite grain boundary.
Translated title of the contributionThe effect of boron on the heat treatable steel 42CrMo4
Original languageGerman
  • Caliskanoglu, Ziya Devrim, Co-Supervisor (external), External person
  • Clemens, Helmut, Supervisor (internal)
  • Turk, Christoph, Co-Supervisor (internal)
  • Primig, Sophie, Co-Supervisor (internal)
Award date27 Jun 2014
Publication statusPublished - 2014

Bibliographical note

embargoed until 08-05-2019


  • 42CrMo4
  • boron
  • heat treatment
  • grain boundary segregation
  • atom probe tomography

Cite this