Duretek Ivica

Research output

Research output per year 1995 2016 2018 2019 2024

• 49 Commissioned report
• 44 Conference contribution
• 29 Article
• 16 Poster
• 16 More
  • 4 Abstract
  • 4 Presentation
  • 3 Paper
  • 2 Web publication/site
  • 1 Chapter
  • 1 Conference article
  • 1 Doctoral Thesis

Research output per year

Research output per year

Search results

• 2019

  Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

  Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben: Lehrstuhl für Konstruieren in Kunst- und Verbundstoffen, Vol. Band 9. p. 101-103 3 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2017

  FILLER CONTENT AND PROPERTIES OF HIGHLY FILLED FILAMENTS FOR FUSED FILAMENT FABRICATION OF MAGNETS

  Gonzalez-Gutierrez, J., Duretek, I., Arbeiter, F., Kukla, C. & Holzer, C., 9 May 2017, ANTEC® 2017. Anaheim, California, USA: Society of Plastics Engineers, 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8 Citations (Scopus)
• 2016

  Controlled shear stress method to measure yield stress of highly filled polymer melts

  Kukla, C., Duretek, I. & Holzer, C., 31 Oct 2016, Proceedings of the Regional Conference Graz 2015 - Polymer Processing Society PPS: Conference Papers. American Institute of Physics Inc., Vol. 1779. 070006

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Effect of Particle Size on the Properties of Highly-Filled Polymers for Fused Filament Fabrication

  Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 25 Jul 2016, 32nd International Conference of the POLYMER PROCESSING SOCIETY. Maazouz, A. (ed.). Lyon, France: Polymer Processing Society (PPS), Vol. 32. 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File
  70 Downloads (Pure)

• Fused Filament Fabrication for Metallic Parts

  Gonzalez-Gutierrez, J., Kukla, C., Schuschnigg, S., Duretek, I. & Holzer, C., 14 Apr 2016, 25. Leobener Kunststoff-Kolloquium: Kunststoffgerechte Bauteilentwicklung- vom Werkstoff zum Produkt. Pinter, G. & Pilz, G. (eds.). Leoben, Austria: Montanuniversität Leoben, Lehrstuhl für Kunststoffverarbeitung, Vol. 25. p. 187-188 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Properties for PIM Feedstocks Used in Fused Filament Fabrication

  Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J. & Holzer, C., 9 Oct 2016, World PM2016 Congress & Exhibition. Petzoldt, F. (ed.). Hamburg, Germany: European Powder Metallurgy Association, p. 1-5 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9 Citations (Scopus)

• Rheometry of Polymer Melt using Processing Machines

  Friesenbichler, W., Neunhäuserer, A. & Duretek, I., 2016, The 16th Internaional Symposium on Applied Rheology (ISAR). Korea: The Korean Society of Rheology, p. 2-5 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4 Citations (Scopus)
• 2015

  Fließverhalten hochgefüllter Kunststoffe

  Duretek, I., 26 Nov 2015, 24. Leobener Kunststoff-Kolloquium. Leoben, p. 57-74

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Rheological Behaviour of Bronze Feedstocks at Low Shear Rates

  Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 14 Sept 2015, Euro PM2015 Congress Proceedings. Reims, France: European Powder Metallurgy Association, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Rheologie für den Kunststoffverarbeiter

  Duretek, I., 2015, VDI Wissensforum - EXTRUSIONSWERKZEUGE FÜR PROFILE UND ROHRE (03FO010005), 29. und 30. September 2015. Karlsruhe, 25 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study of rheological behaviour of stainless steel feedstock taking into account the thermal effects

  Kukla, C., Duretek, I., Schuschnigg, S., Gonzalez-Gutierrez, J., Gooneie, A. & Holzer, C., 30 Nov 2015, IBEREO’15 IBERIAN RHEOLOGY CONFERENCE. Rasteiro, M. G. (ed.). Coimbra, Portugal: Universidad Nacional de Colombia, p. 50-53 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2014

  Modelling of Rheological Behaviour of 316L Feedstocks with Different Powder Loadings and Binder Compositions

  Kukla, C., Duretek, I. & Holzer, C., 2014, Proceedings of the EuroPM2014 Conference. p. 1-6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  2 Citations (Scopus)

• Numerical Simulations of the Flow of Wood Polypropylene Composites with Wall Slipping in a Profile Die: The Significance of Material Data

  Gooneie, A., Schuschnigg, S., Duretek, I. & Holzer, C., 2014, Proceedings of 30th International Conference of the Polymer Processing Society (PPS-30). p. 401-405

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The effect of pre -shear history on the rheological behavior of Wood Plastic Composites

  Duretek, I. & Holzer, C., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 300-300

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Tribological Investigations of Polyamide Nanocomposites

  Translated title of the contribution: Tribological Investigations of Polyamide NanocompositesWitschnigg, A., Laske, S., Duretek, I., Holzer, C., Chitu, L. & Bodner, S., 2014, Proceedings of the 30th Annual Meeting of the Polymer Processing Society. p. 756-756

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2013

  Correlation between Rheotens Measurements and Reinforcement of Polymer Nanocomposites in the Injection Molding Compounder

  Battisti, M., Duretek, I., Friesenbichler, W., Guttmann, P. & Pinter, G., 2013, 1st International Conference on Rheology and Modelling of Materials - Book of Abstracts. p. 39-39

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Measurement of the yield stress of a stainless steel feedstock

  Duretek, I., Kukla, C., Langecker, G. & Holzer, C., 2013, Euro PM2013 Proceedings Volume 1. p. 1-6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  1 Citation (Scopus)

• Rheological behaviour of binder systems for PIM and mixing rules for calculation of viscosity

  Kukla, C., Duretek, I. & Holzer, C., 2013, EuroPM 2013 Proceedings. p. x-x

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  3 Citations (Scopus)

• Rheological properties of wood polymer composites and their role in extrusion

  Duretek, I., Schuschnigg, S., Gooneie, A., Langecker, G. & Holzer, C., 2013, The 1st International Conference on Rheology and Modeling of Materials, Book of Abstracts. p. 36-36

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2012

  Einfluss von Schichtsilkaten auf die Wärmeleitfähigkeit von polymeren Nanocomposites

  Translated title of the contribution: Einfluss von Schichtsilkaten auf die Wärmeleitfähigkeit von polymeren NanocompositesLaske, S., Witschnigg, A., Duretek, I., Mattausch, H., Tscharnutter, D. & Holzer, C., 2012, Mit Compoundieren zum Erfolg. p. 97-104

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene composites

  Translated title of the contribution: Investigation of rheological, thermal and mechanical properties of expanded perlite/polypropylene compositesMattausch, H., Laske, S., Duretek, I., Cirar, K., Flachberger, H. & Holzer, C., 2012, The 28th International Conference of The Polymer Processing Society (PPS-28) Proceedings. p. 235-239

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Rheologie von Kunststoffschmelzen

  Translated title of the contribution: Rheologie von KunststoffschmelzenDuretek, I. & Schuschnigg, S., 2012, VDI Wissensforum, Extrusionswerkzeuge für Rohre und Profile. p. 1-32

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Rheology of wood plastics composites using by-pass-extrusion-rheometer on the twin screw extruder

  Duretek, I., Selvasankar, R. K., Langecker, G. & Holzer, C., 2012, 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition. p. A5-1-A5-8

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2011

  Effect of physical vapour deposition coating on the flow properties of the thermoplastics and wood plastic composites

  Duretek, I., Selvasankar, R. K. & Holzer, C., 2011,

  Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

  . p. 236-236

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Influence of induced shear energy and residence time on material properties of polypropylene nanocomposites

  Witschnigg, A., Laske, S., Duretek, I. & Holzer, C., 2011,

  Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

  . p. 150-151

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Influence of processing conditions and induced shear work on the thermal, rheological and mechanical behavior of polymer nanocomposites

  Mattausch, H., Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

  Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

  . p. 157-158

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Influence of the degree of exfoliation on the thermal conductivity of polypropylene nanocomposites

  Laske, S., Duretek, I., Witschnigg, A. & Holzer, C., 2011,

  Program & Abstracts of 27th Annual Meeting of the Polymer Processing Society

  . p. 155-155

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2010

  Influence of molecular structure on the extensional behaviour of polyethylene melts

  Duretek, I., Florian, M. & Holzer, C., 2010, Book of Abstracts of ASPM 2010 Austrian-Slovenian Polymer Meeting. p. 130-130

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2009

  Measurement of pressure dependent viscosity and its influence on injection moulding simulation

  Holzer, C., Lucyshyn, T., Friesenbichler, W. & Duretek, I., 2009,

  Programme & Abstracts of PPS 2009

  . p. 153-153

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• New Rheological Injection Mould to Measure Pressure Dependent Viscosity in High Shear Rate Range

  Friesenbichler, W., Rajganesh Jegadeesan, X., Duretek, I. & Ramesh Kumar, S., 2009,

  PPS-25 Program & Abstracts

  . p. 185-185

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Pressure dependent viscosity and its importance for injection molding simulations

  Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Filz, P. & Webelhaus, K., 2009, Conference Proceedings. p. 217-222

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Temperature and Pressure Dependence of Thermal Conductivity of Polypropylene Filled with Micro-Scale Fillers

  Duretek, I., Friesenbichler, W. & Kucher, C., 2009, Proceedings of a Conference on Polyolefins and Polymelamines. p. 96-98

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Thermal Conductivity of Talc Filled Polypropylene Measured at High Pressures

  Duretek, I., Friesenbichler, W. & Kucher, C., 2009, PPS-25 Program & Abstracts . p. 135-135

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2008

  New Insights into Feedstock Behaviour and Injection Moulding Simulation for PIM

  Kukla, C., Duretek, I., Friesenbichler, W. & Thornagel, M., 2008, Euro PM2008 Proceedings Vol 2. p. 287-292

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4 Citations (Scopus)
• 2006

  Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results

  Lucyshyn, T., Duretek, I., Langecker, G. & Fischer, K., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 237-237

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Spritzgießsimulation - Einfluss der Stoffdaten auf die Vorhersage von Schwindung und Verzug

  Translated title of the contribution: Spritzgießsimulation - Einfluss der Stoffdaten auf die Vorhersage von Schwindung und VerzugLucyshyn, T., Duretek, I., Fischer, K. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-17

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on rheological behaviour of polymer melts at high shear rates using a new micro-rheology technique

  Duretek, I., Friesenbichler, W., Schuschnigg, S., Jegadeesan, R. & Langecker, G., 2006, Past and future of polymer engineering technology and science. p. 117-130

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Study on rheological behaviour of polymer melts at increased pressure levels with the consideration of the compression heat

  Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Schuschnigg, S. & Langecker, G., 2006, The Chain of Knowledge - From Catalyst to Application. p. 1-1

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und Druckeinfluss

  Translated title of the contribution: Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und DruckeinflussDuretek, I., Friesenbichler, W., Schuschnigg, S. & Rajganesh Jegadeesan, X., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-20

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2005

  Investigation of Flow Behaviour of Extrudable Wood/Melamine Resin Composites

  Nguyen, H. L., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2005, Proceedings of the 2nd Annual European Rheology Conference. p. ---

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Polymer Melt Rheology at High shear rates Using a New Micro-Rheology Technique,

  Friesenbichler, W., Langecker, G., Duretek, I. & Schuschnigg, S., 2005, Proceeding of the 21st Annual Meeting of the Polymer Processing Society. p. 87--

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 1998

  Rheological measurements on the by-pass-extrusion rheometer at flexible polyvinylchloride

  Translated title of the contribution: Rheological measurements on the by-pass-extrusion rheometer at flexible polyvinylchlorideDuretek, I., Friesenbichler, W. & Langecker, G., 1998, Application and processing of plastics and rubber. p. 31-35

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 1997

  Rheological properties of polymer melts

  Translated title of the contribution: Rheological properties of polymer meltsDuretek, I., 1997, MATEST '97, International conference 'material testing'. p. 255-262

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 1995

  Auswirkung der Versuchsparameter auf die Messergebnisse von pvT-Diagrammen für Thermoplaste und Kautschuke

  Translated title of the contribution: Auswirkung der Versuchsparameter auf die Messergebnisse von pvT-Diagrammen für Thermoplaste und KautschukeDuretek, I., Langecker, G. & Friesenbichler, W., 1995, 13.Days of Plastics and Rubber Engineers Society. p. 66-69

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution