Holzer Clemens

Search results

• 2020

  Development of a PAT-controlled process for the production of pharmaceutical polymers with low drug concentration

  Heindl, N., 2020

  Research output: Thesis › Master's Thesis

  Open Access

  File
  71 Downloads (Pure)

• Development of Ceramic Feedstocks for Fused Filament Fabrication

  Cano Cano, S., 2020

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  41 Downloads (Pure)

• Entwicklung des Exjection Verfahrens für Kautschuke unter Berücksichtigung des viskoelastischen Materialverhaltens

  Translated title of the contribution: Development of the Exjection process for rubbers taking into account the viscoelastic material behaviorStieger, S., 2020

  Research output: Thesis › Doctoral Thesis
• 2019

  Abschätzung der Schaumeigenschaften durch Messung der rheologischen Materialeigenschaften und gezielte Beeinflussung der Schaummorphologie durch Anpassung der Materialformulierungen und Düsengeometrie in der Schaumextrusion

  Translated title of the contribution: Estimation of foam properties through measurement of rheological material properties and systematic modification of the foam morphology by adapting material formulations and die geometry in foam extrusionWalluch, M., 2019

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  14 Downloads (Pure)

• Anwendung von Holz-Kunststoff-Verbundwerkstoffen für die additive Fertigung

  Translated title of the contribution: Application of wood-plastic composites for additive manufacturingKrainer, M., 2019

  Research output: Thesis › Master's Thesis

• Biofunktionelle Kunststoffimplantate durch additive Fertigung für die kraniomaxillofaziale Chirurgie

  Translated title of the contribution: Additive Manufacturing of Biofunctional Implants for Craniomaxillofacial SurgeryKatschnig, M., 2019

  Research output: Thesis › Doctoral Thesis

• Development of feedstocks for extrusion based additive manufacturing for catalytic debinding

  Hentschel, L., 2019

  Research output: Thesis › Master's Thesis

• Effect of compatibilizers on blends of immiscible polymers containing polyolefins

  Schuster, F., 2019

  Research output: Thesis › Master's Thesis

• Interactions between polymers and surfaces in extrusion processes

  Zitzenbacher, G., 2019

  Research output: Thesis › Habilitation thesis › peer-review

• Oberflächenfunktionalisiertes Talkum zur Optimierung der Vernetzungsstruktur und der Schaummorphologie von Polyethylen

  Translated title of the contribution: Surface functionalized talc to optimize the crosslinking structure and foam morphology of polyethyleneKaltenegger-Uray, A., 2019

  Research output: Thesis › Doctoral Thesis

• Prozessführung und -optimierung der chemischen Schaumextrusion von PET und anschließender Verarbeitung im ISBM-Prozess

  Translated title of the contribution: Control and optimization of chemical foam extrusion process of PET and subsequent conversion via ISBMRoitner, J., 2019

  Research output: Thesis › Master's Thesis
• 2018

  Highly filled polymers in production technologies

  Kukla, C., 2018

  Research output: Thesis › Habilitation thesis › peer-review

• Optimisation of the Mechanical Properties and Processing of Polypropylene and Poly(Lactic Acid) Parts Produced by Extrusion-Based Additive Manufacturing

  Spörk, M., 2018

  Research output: Thesis › Doctoral Thesis
• 2017

  Modeling and Characterization of Conical and Parallel Co-Rotating Twin Screw Extruders

  Selvasankar, R. K., 2017

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  248 Downloads (Pure)

• Multiscale Modelling and Simulation of Flow Behavior of Polymer/Layered Silicate Nanocomposites Under Shear Flow

  Gooneie, A., 2017

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  167 Downloads (Pure)

• Optimierung der Entgasungsleistung von bedruckten LDPE-Folien in der Extrusion am Beispiel einer TVEplus Recyclinganlage

  Translated title of the contribution: Optimization of the degassing capacity of a TVEplus recycling machine for printed LDPE-filmsSochor, S., 2017

  Research output: Thesis › Master's Thesis

• The Influence of Blast Furnace Slag as a Functional Filler on Polypropylene Compounds

  Mostafa, A., 2017

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  161 Downloads (Pure)

• Vergleich der Verwertungssysteme werkstoffliches und rohstoffliches Polyolefinrecycling anhand von ausgewählten Abfallströmen

  Translated title of the contribution: Comparison of mechanical and feedstock recycling systems for polyolefins on the basis of selected waste flowsMöllnitz, S., 2017

  Research output: Thesis › Master's Thesis

  Open Access

  File
  14 Downloads (Pure)
• 2016

  Auswirkung der Materialeigenschaften von ungefüllten und holzgefüllten Biopolymeren für die Anwendung von Fused Filament Fabrication

  Translated title of the contribution: Influence of material properties of unfilled and wood filled biopolymers on processing with Fused Filament FabricationMooslechner, P., 2016

  Research output: Thesis › Master's Thesis

  Open Access

  File
  28 Downloads (Pure)

• Compoundierung von Filamenten für medizinische FFF-Anwendungen

  Translated title of the contribution: Compounding of Filaments for Medical FFF-ApplicationsPayr, B., 2016

  Research output: Thesis › Master's Thesis

  Open Access

  File
  265 Downloads (Pure)

• Optimierte Entformung mikrostrukturierter Spritzgussbauteile durch Werkzeugbeschichtungen

  Translated title of the contribution: Optimized demolding of microstructured injection molding parts through tool coatingsWindischbauer, L., 2016

  Research output: Thesis › Master's Thesis
• 2015

  Analysis on factors affecting the demolding of micro-structured devices in the injection molding process

  Strohmayer, B., 2015, 102 p.

  Research output: Thesis › Master's Thesis

  Open Access

  File
  89 Downloads (Pure)

• Demolding of micro-structured surfaces in the injection molding process

  Struklec, T., 2015

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  90 Downloads (Pure)

• Development of halogen-free flame retardant polypropylene compounds for pipe application

  Mattausch, H., 2015

  Research output: Thesis › Doctoral Thesis

• Neuentwicklung eines Tauchcomputers mit berührungssensitivem Display

  Translated title of the contribution: Development of a dive computer with a touch sensitive displayThallinger, F., 2015

  Research output: Thesis › Master's Thesis

  Open Access

  File
  352 Downloads (Pure)

• Optimization of the injection molding technology for profiled high-performance thermoplastic sealing elements

  Janko, M., 2015

  Research output: Thesis › Doctoral Thesis

• The mold in the focus of research for improved quality of injection molded parts

  Lucyshyn, T., 2015

  Research output: Thesis › Habilitation thesis › peer-review

• Verfahren zur Herstellung von alkalisch und organophil aktiviertem Kalzium-Montmorillonit für den Einsatz in Polymer-Compounds

  Translated title of the contribution: Process for preparation of alkaline and organo-modified Calcium-Montmorillonite as filler for polymer compoundsKrischey, E., 2015

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  500 Downloads (Pure)
• 2014

  Analysis, Implementation and Investigation of a Wireless In-Mold Sensor for Injection Molding

  Müller, F., 2014, 207 p.

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  420 Downloads (Pure)

• Bruchbeständigkeit einer extrusionsblasgeformten Kunststoffflasche in ihrem Produktlebenszyklus

  Translated title of the contribution: Fracture resistance of an extrusion blow molded plastic bottle during a product life cycleRaimann, P., 2014, 81 p.

  Research output: Thesis › Master's Thesis

• Charakterisierung und Einfluss der rheologischen Eigenschaften auf die Schaummorphologie physikalisch geschäumter Polyethylenmaterialformulierungen

  Translated title of the contribution: Characterization and influence of rheological properties on the foam morphology of physically foamed polyethylene material formulationsUray, A., 2014, 84 p.

  Research output: Thesis › Master's Thesis

  Open Access

  File
  189 Downloads (Pure)

• Charakterisierung von Kunststoffen in Hinblick auf inline Qualitätskontrolle in Extrusionsprozessen mittels Nahinfrarotspektroskopie

  Translated title of the contribution: Characterization of polymers in terms of inline quality control in extrusion processes using near-infrared spectroscopyWitschnigg, A., 2014, 178 p.

  Research output: Thesis › Doctoral Thesis

  Open Access

  File
  19 Downloads (Pure)

• Compounding of polymer nanocomposites

  Laske, S., 2014

  Research output: Thesis › Habilitation thesis › peer-review

• Optimierung der Wärmeleitfähigkeit von kompakten Polyethylen in Hinblick auf geschäumte Dämmstoffe

  Translated title of the contribution: Optimization of the thermal conductivity of bulk polyethylene in terms of foamed insulationKerschbaumer, R., 2014

  Research output: Thesis › Master's Thesis

  Open Access

  File
  1052 Downloads (Pure)

• Steigerung der thermischen Beständigkeit von Polymeren auf Basis nachwachsender Rohstoffe

  Translated title of the contribution: Increase of the thermal stability of polymers based on renewable resourcesZiegler, W., 2014, 110 p.

  Research output: Thesis › Master's Thesis

  Open Access

  File
  954 Downloads (Pure)

• Untersuchungen zur Rückgewinnung ausgewählter technischer Thermoplaste aus komplexen Abfallströmen

  Translated title of the contribution: Investigations regarding the recovery of various technical polymer types from complex waste streamsHoeggerl, G., 2014

  Research output: Thesis › Master's Thesis (University Course)
• 2013

  Bohrschlamm als Füllstoff in thermoplastischen Kunststoffen

  Translated title of the contribution: Cuttings as filler in thermoplastic polymersBegusch, M., 2013

  Research output: Thesis › Master's Thesis

  Open Access

  File
  111 Downloads (Pure)

• Charakterisierung der Entstehung des „Twist & Curl“ Effektes von Verbundmaterialformaten für die Getränkekartonherstellung

  Translated title of the contribution: Characterization of the "twist & curl"-effect of liquid packaging paperboard via statistical data analysis of the recorded process data.Mungenast, D., 2013, 94 p.

  Research output: Thesis › Master's Thesis

• Charakterisierung und Weiterentwicklung von faserverstärkten Hochleistungsthermoplasten als Ventilplattenwerkstoffe

  Translated title of the contribution: Characterization and development of high-performance fiber-reinforced thermoplastics as valve plate materialsKoppelmüller, G., 2013

  Research output: Thesis › Master's Thesis

  Open Access

  File
  261 Downloads (Pure)

• Entwicklung und Konstruktion eines neuartigen Mundstücks für ein Kreislauftauchgerät

  Translated title of the contribution: Development and design of a new mouthpiece for a rebreatherKessler, M., 2013

  Research output: Thesis › Master's Thesis

  Open Access

  File
  741 Downloads (Pure)

• Geometrical modification of weld lines for high performance plastics in injection molding

  Kaufmann, A., 2013, 112 p.

  Research output: Thesis › Master's Thesis

  Open Access

  File
  182 Downloads (Pure)

• Polymere mikro- und nanoskalige Compounds mit verbesserten tribologischen Eigenschaften

  Translated title of the contribution: Polymeric micro- and nano compounds with improved tribological propertiesWalluch, M., 2013

  Research output: Thesis › Master's Thesis

  Open Access

  File
  47 Downloads (Pure)
• 2012

  Einfluss von Material und Prozessparameter auf Verstippung von Bag-in-Box-Folien

  Translated title of the contribution: Influence of material and processing parameter to the production of specs in Bag in Box filmsDoler, M., 2012

  Research output: Thesis › Master's Thesis

  Open Access

  File
  45 Downloads (Pure)

• Optimierung von PLA/TPS Blends

  Translated title of the contribution: Optimization of PLA / TPS blendsHirschenauer, M., 2012

  Research output: Thesis › Master's Thesis

• Thermal conductivity of polymer nanocomposites

  Kamaraj, M. P., 2012

  Research output: Thesis › Master's Thesis
• 2011

  Berechnung der Einzugszone und der Aufschmelzzone eines konisch gleichlaufenden Doppelschneckenextruders

  Translated title of the contribution: Mathematical process description of the feeding zone and the melting zone of a corotating conical twin-screw extruderMünzer, M. H., 2011

  Research output: Thesis › Master's Thesis

  Open Access

  File
  2874 Downloads (Pure)

• Einfluss von Verarbeitungsparametern im Spritzguss und Fügen auf die Eigenschaften von mikrofluidischen Chips für medizintechnische Anwendungen

  Translated title of the contribution: Influence of processing parameters in injection moulding and bonding on properties of microfluidic chips for medical-technical applicationsPfefferkorn, M. S., 2011

  Research output: Thesis › Master's Thesis

  Open Access

  File
  552 Downloads (Pure)

• Herstellung medienführender Leitungen durch Kombination von Coinjektion und Wasserinjektionstechnik

  Translated title of the contribution: Production of fluid conducts by combination of coinjection and water assisted injection mouldingStückler, S., 2011

  Research output: Thesis › Master's Thesis

  Open Access

  File
  183 Downloads (Pure)

• Homogenitätsanalyse von Feststoffmischungen

  Translated title of the contribution: Homogeneity analysis of solid mixturesEberhard, D., 2011

  Research output: Thesis › Master's Thesis

  Open Access

  File
  879 Downloads (Pure)

• Measurement of the visual perceptibility of sink marks in injection molded parts

  Haba, D., 2011, 79 p.

  Research output: Thesis › Master's Thesis

  Open Access

  File
  659 Downloads (Pure)