Research output per year
Research output per year
- 33 results
Search results
-
2020
Comparison of different inspection techniques for fatigue cracks
Oswald-Tranta, B., Feistkorn, S., Rössler, G. & Scherrer, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, The Internat. Soc. for Optical Engineering, Vol. 11409. 114090C. (Proceedings of SPIE).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
1 Citation (Scopus) -
Detection of short fatigue cracks by inductive thermography
Oswald-Tranta, B., Feistkorn, S., Rössler, G., Tuschl, C. & Scherrer, M. C., 2020, 15th Quantitative InfraRed Thermography Conference 6 – 10 July 2018, Porto, Portugal. QIRT CouncilResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access -
Online thermography inspection for automated tape layup
Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Habicher, M., 2020, Thermosense: Thermal Infrared Applications XLII. Oswald-Tranta, B. & Zalameda, J. N. (eds.). SPIE, Vol. 11409. 114090H. (Proceedings of SPIE).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Scanning thermal testing of subsurface defects in metal - coating structures
Chulkov, A., Oswald-Tranta, B., Tuschl, C. & Vavilov, V. P., 2020, in Proc. of 15th QIRT Conf., 2020.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2019
Flash and inductive thermography for CFRP inspection
Oswald-Tranta, B., Tuschl, C. & Schledjewski, R., 1 Jan 2019, Thermosense: Thermal Infrared Applications XLI. de Vries, J. & Oswald-Tranta, B. (eds.). SPIE, 110040L. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 11004).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Induction thermography - a non-destructive testing method
Oswald-Tranta, B., 2019, QIRT KOnferenz Sammelband. TokyoResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Vergleich von Induktions- und Blitzthermografie
Oswald-Tranta, B. & Tuschl, C., 2019, Thermografieforum Eugendorf. Thermografieforum EugendorfResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2018
Lock-in inductive thermography for surface crack detection
Oswald-Tranta, B., 1 Jan 2018, Thermosense: Thermal Infrared Applications XL. SPIE, Vol. 10661. 106610UResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
3 Citations (Scopus) -
Lock-in inductive thermography for surface crack detection in non-magnetic metals
Oswald-Tranta, B. & Tuschl, C., 2018, 14th Quantitative InfraRed Thermography Conference: 25 – 29 June 2018, Berlin, Germany. QIRT Council, Vol. 10.21611/qirt.2018.c. p. 243-252 10 p.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
Open Access -
2017
Motion Deblurring of Infrared Images
Oswald-Tranta, B., 2017, AMA Conferences 2017 - SENSOR 2017 and IRS² 2017.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Rissdetektion in nicht-magnetischen und magnetischen Materialien mit induktiver Thermographie
Oswald-Tranta, B., 2017, Thermographie-Kolloquium 2017. DGZfP, Vol. 163.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Surface crack detection in different materials with inductive thermography
Oswald-Tranta, B., 2017, Thermosense: Thermal Infrared Applications XXXIX. SPIE, Vol. 10214. 102140WResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Thermographic investigations of metal inclusions in 3D printed samples
Oswald-Tranta, B., Schmidt, R. & Tuschl, C., 2017, Thermosense: Thermal Infrared Applications XXXIX. SPIE, Vol. 10214. 102140SResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2016
Blitztherografische Untersuchungen an CFK- und Kunststoffbauteilen
Oswald-Tranta, B. & Grandl, T., 23 Sept 2016, Thermografieforum Eugendorf 2016.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Comparison of time and frequency behavior in TSR and PPT evaluation
Oswald-Tranta, B., 2016, TWELFTH INTERNATIONAL CONFERENCE ON QUALITY CONTROL BY ARTIFICIAL VISION. Vol. 9861.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
2 Citations (Scopus) -
Investigations for Determining Surface Crack Depth with Inductive Thermography
Oswald-Tranta, B., 2016, Proceedings 19th World Conference on Non-Destructive Testing 2016.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2015
A Round Robin Test of Flash Thermography of CFRP and Metal Structures
Rothbart, N., Maierhofer, C., Goldammer, M., Hohlstein, F., Koch, J., Kryukov, I., Mahler, G., Stotter, B., Walle, G., Oswald-Tranta, B. & Sengebusch, M., 19 Nov 2015, 7th International Symposium on NDT in Aerospace. Vol. 156.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Detektion von Rissen und Bestimmung der Risstiefe mit induktiver Thermografie
Oswald-Tranta, B., Schmidt, R. & Buchmayr, B., 13 May 2015, Berichtsband DACH-Jahrestagung 2015. Salzburg: DGZfP, Vol. 152.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Untersuchungen zur Bestimmung der Risstiefe mit induktiver Thermografie
Oswald-Tranta, B., 2015, Thermographie-Kolloquium 2015. DGZfP, Vol. 154. (Thermographie-Kolloquium 2015; vol. 154, no. 14).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2013
Comparison of Pulse Phase and Thermographic Signal Reconstruction Processing Methods
Oswald-Tranta, B. & Shepard, S. M., 2013, Proc. of SPIE Vol. 8705. p. 87050S-1-87050S-9Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
15 Citations (Scopus) -
Economic investigation of impact damage using non-destruction thermography analysis on structural automotive parts
Maier, A., Schledjewski, R. & Oswald-Tranta, B., 2013, ICSAAM 2013. p. 1-18Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2012
Scanning Pulse Phase Thermografie mit induktiver linearer Heizung
Oswald-Tranta, B., 2012, DGZfP Berichtsband 136-CD, DACH Jahrestagung 2012. DGZfPResearch output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Scanning Pulse Phase Thermography with inductive line source
Oswald-Tranta, B. & Sorger, M., 2012, 11th International Conference on Quantitative Infrared Thermography. p. 264-1-264-10Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2011
Detection of subsurface defects in aluminium with thermoinductive inspection
Oswald-Tranta, B. & Sorger, M., 2011, Proceedings Vol. 8013. p. 00-00Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
4 Citations (Scopus) -
Fusion of geometric and thermographic data for the automatic inspection of forging and castings
Oswald-Tranta, B. & O'Leary, P., 2011, Proc. of SPIE 8000. p. 80000G-1-80000G-9Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2010
Automatic defect classification in inductive thermo-graphical testing
Oswald-Tranta, B. & Sorger, M., 2010, QIRT 2010, Proceedings. p. 511-517Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2009
Thermographical investigations of inductively heated metallic surfaces
Oswald-Tranta, B. & Sorger, M., 2009, Thermosense XXXI. p. 72990Z-72990Z11Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Thermographic crack detection and failure classification
Oswald-Tranta, B., Fauster, E., Sorger, M. & O'Leary, P., 2009, Thermographic crack detection and failure classification.Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2008
Time-dependent evaluation of inductive pulse heating measurements
Oswald-Tranta, B., 2008, QIRT 2008, Proceedings. p. 457-460Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
2007
The influence of crack shapes and geometries on the result of the thermo-inductive crack detection
Wally, G. & Oswald-Tranta, B., 2007, The influence of crack shapes and geometries on the result of the thermo-inductive crack detection. p. 6541111-6541118Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
11 Citations (Scopus) -
2005
Detection of Surface Cracks on Steel Wire using Thermo-inductive Method
Oswald-Tranta, B., Wally, G. & O' Leary, P., 2005, Proceedings of 7th International Conference on Quality Control by Artifical Vision. p. 69-74Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
-
Thermo-inductive investigations of steel wires
Wally, G. & Oswald-Tranta, B., 2005, XXIV. Verformungskundliches Kolloquium. p. 31-40Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
10 Citations (Scopus) -
Thermo-inductive investigations of steel wires for surface cracks
Oswald-Tranta, B. & Wally, G., 2005, Thermosense XXVII, Proceedings of SPIE. p. 245-254Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
10 Citations (Scopus)