Chair of Designing Plastics and Composite Materials (250)

Research output

Research output per year 1999 2016 2019 2022

• 410 Citations
• 12 h-index
• 36 Article
• 16 Conference contribution
• 11 Master's Thesis
• 7 Abstract
• 22 More
  • 5 Poster
  • 4 Diploma Thesis
  • 3 Paper
  • 3 Doctoral Thesis
  • 2 Chapter
  • 2 Other contribution
  • 1 Presentation
  • 1 Conference article
  • 1 Review article

Research output per year

Research output per year

Search results

• 2022

  Dynamic Mechanical Response in Epoxy Nanocomposites Incorporating Various Nano-Silica Architectures

  Chaudhary, S., Vryonis, O., Vaughan, A. S., Andritsch, T. & Feuchter, M., 2022, ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 86-89 4 p. (ICD 2022 - IEEE 2022 4th International Conference on Dielectrics, Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Injection Molding Simulation of Polyoxymethylene Using Crystallization Kinetics Data and Comparison with the Experimental Process

  Schrank, T., Berer, M., Haar, B., Ramoa, B., Lucyshyn, T., Feuchter, M., Pinter, G., Speranza, V. & Pantani, R., 2022, In: Polymer Crystallization. 2022, 2387752.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics

  Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139, 114799.

  Research output: Contribution to journal › Article › Research › peer-review
• 2021

  Efficient 3d finite element modeling of cyclic elasto-plastic rolling contact

  Meyer, K. A., Skrypnyk, R. & Pletz, M., Sept 2021, In: Tribology International. 161.2021, September, 12 p., 107053.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access

• Self-Reducing Silver Ink on Polyurethane Elastomers for the Manufacture of Thin and Highly Stretchable Electrical Circuits

  Krawczyk, K. K., Groten, J., Glushko, O., Krivec, M., Frühwirth, M., Schulz, G., Wolf, C., Hartmann, D., Moser, M., Cordill, M. J., Stadlober, B. & Griesser, T., 27 Apr 2021, In: Chemistry of materials. 33, 8

  Research output: Contribution to journal › Article › Research › peer-review

• Wear behavior of a heat-treatable al-3.5cu-1.5 mg-1Si alloy manufactured by selective laser melting

  Wang, P., Lei, Y., Qi, J. F., Yu, S. J., Setchi, R., Wu, M. W., Eckert, J., Li, H. C. & Scudino, S., 1 Nov 2021, In: Materials. 14, 22, 7048.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  2 Citations (Scopus)

• 退火处理对激光选区激光熔化成形 Ti-6Al-4V 合金的显微组织和力学性能影响

  Translated title of the contribution: Microstructural evolution and mechanical properties of selective laser melted Ti-6Al-4V induced by annealing treatmentWang, P., Chen, F. H., Eckert, J., Pilz, S., Scudino, S. & Prashanth, K. G., Apr 2021, In: Journal of Central South University = Zhongnan-Daxue-xuebao : yingwen-ban. 28, 4, p. 1068-1077 10 p.

  Research output: Contribution to journal › Article › Research › peer-review
  2 Citations (Scopus)
• 2020

  A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting

  WANG, P., ECKERT, J., PRASHANTH, K. G., WU, M. W., KABAN, I., XI, L. X. & SCUDINO, S., Aug 2020, In: Transactions of Nonferrous Metals Society of China (English Edition). 30, 8, p. 2001-2034 34 p.

  Research output: Contribution to journal › Article › Research › peer-review
  20 Citations (Scopus)

• Effiziente Vorhersage der Rissinitiierung in porösen Materialien mit einem kombinierten Energie- und Spannungskriterium

  Translated title of the contribution: Efficient prediction of crack initiation in materials containing voids with a coupled stress- and energy-criterionRettl, M., 2020

  Research output: Thesis › Master's Thesis

  Open Access

  File
  68 Downloads (Pure)

• Implementation of a finite element model to predict the impact behaviour of 3D-printed PMMA specimens

  Moser, C., 2020

  Research output: Thesis › Master's Thesis

  Open Access

  File
  52 Downloads (Pure)

• Introduction of a new in-situ measurement system for the study of touch-feel relevant surface properties

  Ules, T., Hausberger, A., Grießer, M., Schlögl, S. & Gruber, D. P., 1 Jun 2020, In: Polymers. 12.2020, 6, 1380.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  4 Citations (Scopus)
• 2019

  Analysis of the critical stresses in high-voltage composite winding insulations under thermal loads

  Pothukuchi, H. K. R., Fuchs, P. F. & Schuecker, C., 2019, In: Journal of composite materials.

  Research output: Contribution to journal › Article › Research › peer-review

• Constitutive modeling of anisotropic plasticity with application to fiber-reinforced composites

  Nagaraja, S. G., Pletz, M. & Schuecker, C., 15 Dec 2019, In: International journal of solids and structures. 180-181, p. 84-96 13 p.

  Research output: Contribution to journal › Article › Research › peer-review
  4 Citations (Scopus)

• Crack initiation in layered composites using a coupled stress-energy criterion

  Shevchuk, M., 12 Nov 2019.

  Research output: Contribution to conference › Poster › Research › peer-review

• Cyclic plastic deformation of rails in rolling/sliding contact –quasistatic FE calculations using different plasticity models

  Pletz, M., Meyer, K. A., Künstner, D., Scheriau, S. & Daves, W., 15 Oct 2019, In: Wear. 436-437, 202992.

  Research output: Contribution to journal › Article › Research › peer-review
  5 Citations (Scopus)

• Damage and Failure in Layered Composite Structures

  Pettermann, H. E. & Schuecker, C., 2019, Altenbach H., Öchsner A. (eds) Encyclopedia of Continuum Mechanics. Springer Berlin

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Transfer › peer-review

• Entwicklung eines FEM Modellierungsansatzes zur Beschreibung des Verformungsverhaltens von geflochtenen Kunststoffseilen

  Translated title of the contribution: Development of an FEM modeling approach for the description of the deformation behavior of braided synthetic ropesFimbinger, N., 2019

  Research output: Thesis › Master's Thesis

  Open Access

  File
  35 Downloads (Pure)

• Evaluation of crack initiation from pores in layered materials using a coupled stress-energy criterion

  Schuecker, C., Shevchuk, M., Drvoderic, M. & Pletz, M., 2019.

  Research output: Contribution to conference › Abstract › peer-review

• Evaluierung mikromechanischer Methoden hinsichtlich praktischer Anwendbarkeit für faserverstärkte Kunststoffe

  Translated title of the contribution: Evaluation of micromechanical methods with regard to practical applicability for fiber-reinforced polymersSchipfer, C., 2019

  Research output: Thesis › Master's Thesis

  Open Access

  File
  19 Downloads (Pure)

• Fatigue characterization of embedded layers in CFR Composites: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition

  Schneider, C., Drvoderic, M., Pinter, G., Schuecker, C. & Gaier, C., 1 Jan 2019, In: Procedia Structural Integrity. 19, p. 370-379 10 p.

  Research output: Contribution to journal › Conference article › peer-review

• FE-Modelle zur Vorhersage des Versagens in stahlseilverstärkten elastomeren Fördergurten

  Frankl, S. M., 25 Apr 2019.

  Research output: Contribution to conference › Poster › Research › peer-review

• Finite element model for predicting the initiation of subsurface damage in railway crossings—A parametric study

  Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 2019, In: Proceedings of the Institution of Mechanical Engineers. Part F, Journal of rail and rapid transit. 2019, 6, p. Pages 614-628

  Research output: Contribution to journal › Article › Research › peer-review
  5 Citations (Scopus)

• Finite Element Models Describing the Failure in Steel Cable Reinforced Rubber Composites

  Frankl, S. M., 3 Sept 2019.

  Research output: Contribution to conference › Abstract

• Finite element model to describe crack deflection and constrained micro-cracking

  Tauscher, M., Pletz, M., Arbeiter, F. & Schuecker, C., 28 Aug 2019, p. 371-374. 4 p.

  Research output: Contribution to conference › Paper

• Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

  Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  8 Citations (Scopus)

• Investigation of deformation mechanisms in manganese steel crossings using FE models

  Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 13 Jun 2019, In: Tribology International. 138.2019, October, p. 424-434 11 p.

  Research output: Contribution to journal › Article › Research › peer-review
  1 Citation (Scopus)

• Kombinierte Struktur- und Materialoptimierung

  Lang, M. C., 25 Apr 2019.

  Research output: Contribution to conference › Poster › Research › peer-review

• Mechanical Characterization of PMMA Produced by Fused Filament Fabrication as a Potential Material for Cranial Bone Reconstruction

  Petersmann, S., Spörk, M., Lang, M. C., Moser, C., Pinter, G. G. & Arbeiter, F., 2019, Abstract Book of the First European Conference on Structural Integrity of Additively Manufactured Materials. 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• On the formulation and numerical implementation of anisotropic elasto-plasticity with application to fibre-reinforced composites

  Gaddikere Nagaraja, S., 2019

  Research output: Thesis › Doctoral Thesis

• On the formulation of anisotropic plasticity for polymeric composites - rate-dependent models with non-linear isotropic/kinematic hardening.

  Gaddikere Nagaraja, S. & Schuecker, C., 2019, Proceedings in Applied Mathematics and Mechanics 2019.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Optimization of the specimen geometry of unidirectional reinforced composites with a fibre orientation of 90° for tensile, quasi-static and fatigue tests

  Schneider, C., Drvoderic, M., Schuecker, C. & Pinter, G., 28 Jun 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications Ltd, p. 594-597 4 p. (Key Engineering Materials; vol. 809 KEM).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Real-Time Measurement of Dynamic Wheel-Rail Contacts Using Ultrasonic Reflectometry

  Zhou, L., Brunskill, H., Pletz, M., Daves, W., Scheriau, S. & Lewis, R., 16 Apr 2019, In: Journal of Tribology. 141.2019, 6, 9 p., 061401.

  Research output: Contribution to journal › Article › Research › peer-review
  12 Citations (Scopus)

• Schriftenreihe Kunststofftechnik Leoben, Band 9: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“

  Schuecker, C. & Fuchs, P. F., 2019, Schriftenreihe Kunststofftechnik Leoben, Band 9: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“. Vol. 9. (Schriftenreihe Kunststofftechnik Leoben).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

• Simultaneous Structural and Material Optimisation

  Lang, M. C., 16 Oct 2019.

  Research output: Contribution to conference › Abstract › peer-review

• THE IMPORTANCE OF THE MECHANICAL INTERACTIONS BETWEEN CONSTITUENT MATERIALS FOR CONSTITUTIVE MODELING OF HYPERELASTIC FIBER–REINFORCED COMPOSITES

  Mansouri, M. R., Fuchs, P. F. & Schuecker, C., 2019, Proceedings of ICoNSoM 2019 - International Conference on Nonlinear Solid Mechanics.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Verbesserter Materialeinsatz durch kombinierte Optimierung von Bauteilstruktur und Material

  Lang, M. C. & Frankl, S. M., 12 Nov 2019.

  Research output: Contribution to conference › Poster › Research

• Vorhersage des Ermüdungsverhaltens von Verbundwerkstoffen

  Drvoderic, M., 12 Nov 2019. 1 p.

  Research output: Contribution to conference › Poster › Research

• Zur Bewertung der Zuverlässigkeit von Verbundbauteilen

  Schuecker, C., 2019, Schriftenreihe Kunststofftechnik Leoben: „28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik“. Vol. 9.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
• 2018

  Calculation of cyclic plastic surface deformations in Rails-quasistatic Fe models

  Pletz, M., Daves, W., Künstner, D. & Scheriau, S., 1 Jan 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. TU Delft, p. 784-791 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Hyperelastic modeling of woven structures undergoing large deformations

  Mansouri, Fuchs, P. F. & Schuecker, C., 2018.

  Research output: Contribution to conference › Paper

• Induced material degradation of elastomers in harsh environments

  Balasooriya, W., Schrittesser, B., Pinter, G. & Schwarz, T., 15 May 2018, (E-pub ahead of print) In: Polymer Testing. 69.2018, August, p. 107-115 9 p.

  Research output: Contribution to journal › Article › Research › peer-review
  13 Citations (Scopus)

• Numerical assessment of materials used in railway crossings by predicting damage initiation – Validation and application

  Wiedorn, J., Daves, W., Ossberger, U., Ossberger, H. & Pletz, M., 18 Aug 2018, In: Wear. 2018, Volumes 414–415, p. 136-150

  Research output: Contribution to journal › Article › Transfer › peer-review
  5 Citations (Scopus)

• Path calculation, technology and opportunities in dry fiber winding: A review

  Sofi, T., Neunkirchen, S. & Schledjewski, R., 3 Jul 2018, In: Advanced Manufacturing: Polymer and Composites Science. 4, 3, p. 57-72 16 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access
  12 Citations (Scopus)

• Peel strength characterisation on ply/ply interface using wedge and T-peel/pull-type tests

  Satheesh, B., Tonejc, M., Potakowskyj, L., Pletz, M., Fauster, E., Kaynak, B. & Schledjewski, R., 8 Nov 2018, In: Polymers & Polymer Composites (Polymers and polymer composites). 26.2018, 8-9, p. 431-435 5 p.

  Research output: Contribution to journal › Article › Research › peer-review
  4 Citations (Scopus)

• Probeneinflüsse bei der mechanischen Prüfung von Composites

  Translated title of the contribution: Influences of specimen parameters in mechanical testing of compositesDrvoderic, M., 2018

  Research output: Thesis › Master's Thesis

  Open Access

  File
  706 Downloads (Pure)
• 2017

  3D Printing of Polymer-Bonded Rare-Earth Magnets with a Variable Magnetic Compound Fraction for a Predefined Stray Field

  Huber, C., Abert, C., Bruckner, F., Groenefeld, M., Schuschnigg, S., Teliban, I., Vogler, C., Wautischer, G., Windl, R. & Suess, DI., 1 Dec 2017, In: Scientific Reports. 7, 1, 9419.

  Research output: Contribution to journal › Article › Research › peer-review

  Open Access
  53 Citations (Scopus)

• Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

  Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

  Research output: Contribution to journal › Article › Research › peer-review
  3 Citations (Scopus)

• Photo-responsive thiol-ene networks for the design of switchable polymer patterns

  Radl, S. V., Schipfer, C., Kaiser, S., Moser, A., Kaynak, B., Kern, W. & Schlögl, S., 2017, In: Polymer Chemistry. 2017, p. 1562-1572 8.

  Research output: Contribution to journal › Article › Research › peer-review

  18 Citations (Scopus)

• Study of Influence of Residual Stresses on Crack Propagation in Particulate Ceramic Composites

  Majer, Z., Štegnerová, K., Hutar, P., Pletz, M., Bermejo, R. & Náhlík, L., 2017, In: Solid State Phenomena. 258, p. 178-181 4 p.

  Research output: Contribution to journal › Article › Research › peer-review
  3 Citations (Scopus)
• 2016

  A finite element model to simulate the physical mechanisms of wear and crack initiation in wheel/rail contact

  Daves, W., Kubin, W., Scheriau, S. & Pletz, M., 15 Nov 2016, In: Wear. 366-367, p. 78-83 6 p.

  Research output: Contribution to journal › Article › Research › peer-review
  34 Citations (Scopus)