Properties for PIM Feedstocks Used in Fused Filament Fabrication

Publikation: Beitrag in Buch/Bericht/KonferenzbandBeitrag in Konferenzband

9 Zitate (Scopus)

Abstract

Fused filament fabrication (FFF) is one of the most commonly used polymer-based additive manufacturing techniques. FFF could be used to shape parts with PIM feedstocks instead of injection moulding and after debinding and sintering obtain solid parts with complex geometry. Currently used PIM feedstocks do not necessarily meet the requirements of the majority of FFF machines available in the market, which rely on the use of flexible filaments. In this paper, the specific properties needed by the FFF feedstock materials are discussed. Different feedstocks with 316L steel powder at 55 vol.-% were characterized (viscosity and mechanical properties) and tested regarding the printability using a conventional FFF machine. Out of these experiments the most important requirements for printable PIM feedstocks are deduced.
OriginalspracheEnglisch
TitelWorld PM2016 Congress & Exhibition
Redakteure/-innenFrank Petzoldt
ErscheinungsortHamburg, Germany
Herausgeber (Verlag)European Powder Metallurgy Association
Seiten1-5
Seitenumfang5
PublikationsstatusVeröffentlicht - 9 Okt. 2016
VeranstaltungPowder Metallurgy World Congress and Exhibition - Congress Centrum Hamburg, Hamburg, Deutschland
Dauer: 9 Okt. 201613 Okt. 2016
http://www.worldpm2016.com/

Konferenz

KonferenzPowder Metallurgy World Congress and Exhibition
KurztitelWorld PM 2016
Land/GebietDeutschland
OrtHamburg
Zeitraum9/10/1613/10/16
Internetadresse

Dieses zitieren